Stromberg Choke bracket Photo and diagram required...
6 posts
• Page 1 of 1
I've misplaced the bracket and clip that holds the choke cable to the front carbs. I think its about 3/4" wide and maybe 2" long. CAn some one send me a photo and dimensions of said bracket as I think I'll have to make one.
I did post in the wanted section to see if anyone had a spare, but no response.
Thanks
I did post in the wanted section to see if anyone had a spare, but no response.
Thanks
-
mark030358 - Coveted Fifth Gear
- Posts: 1165
- Joined: 29 May 2004
Ah-ha! I take it that this the bracket that holds the extra bit of cable you need to operate chokes on both carbs? My Europa only has operation on one carb at the moment but I have thought of changing it.
If so, many thanks Even though I didn't ask the question!
If so, many thanks Even though I didn't ask the question!
-
RogerFrench - Fourth Gear
- Posts: 536
- Joined: 01 Dec 2009
Just to complete the picture, here's the bracket and clip from the rear carb.......
Roger
S4 DHC
S4 DHC
- oldelanman
- Coveted Fifth Gear
- Posts: 1930
- Joined: 02 Jan 2008
Well I have sourced a bracket, so now just a couple of things I need.
First, can someone post some good close up pictures of how the cable connects to both front and rear carbs please.
Second, is the choke cable a contiouous length from the dash through the front carb and finally to the rear one? If so do we have a length for this please. I have seen several posts that quote between 1.5 and 1.7 metres.
thanks in advance
Mark
First, can someone post some good close up pictures of how the cable connects to both front and rear carbs please.
Second, is the choke cable a contiouous length from the dash through the front carb and finally to the rear one? If so do we have a length for this please. I have seen several posts that quote between 1.5 and 1.7 metres.
thanks in advance
Mark
-
mark030358 - Coveted Fifth Gear
- Posts: 1165
- Joined: 29 May 2004
6 posts
• Page 1 of 1