Weber jets
17 posts
• Page 2 of 2 • 1, 2
Post by: triumphelan » Mon Oct 17, 2005 12:09 pm
Main jet is marked 100 the hole size is 1.1m/m dia.is that the correct size for a main jet with that marking on .
Regards John 1969S4DHC
- triumphelan
- Second Gear
- Posts: 195
- Joined: 04 Jul 2005
Post by: type26owner » Mon Oct 17, 2005 1:41 pm
John,
100=1.00mm diameter. Someone has altered the jets by enlarging the bore by another 100 microns. Another 100 microns is a %20 difference in the area.
100=1.00mm diameter. Someone has altered the jets by enlarging the bore by another 100 microns. Another 100 microns is a %20 difference in the area.
- type26owner
- Coveted Fifth Gear
- Posts: 1246
- Joined: 18 Sep 2003
17 posts
• Page 2 of 2 • 1, 2
Total Online:
Users browsing this forum: No registered users and 21 guests
Site map
SitemapIndex
RSS Feed