Chinese Webers

PostPost by: Baggy2 » Mon Aug 19, 2024 7:06 pm

Ref Ebay item 326099399458

Has anybody any experience of the above ? - or similar.

I'm not in the market for new carbs and don't expect to be. I expect this to conform to the ' if it looks too good to be true it probably is' rule but I cant help being curious to hear others experience - if any.

Cheers
Baggy
Baggy2
Third Gear
Third Gear
 
Posts: 267
Joined: 05 Feb 2010

PostPost by: NTG999 » Mon Aug 19, 2024 9:31 pm

A quick through the negative feedback answers all your questions
NTG999
Second Gear
Second Gear
 
Posts: 50
Joined: 09 Dec 2020

PostPost by: Baggy2 » Tue Aug 20, 2024 10:22 am

Yes - I had noticed the feedback percentage was low . In my ebay experience any transaction with a trader with less than 99% is risky. As I said I was just curious if any Lotus folk had first hand experience. Thought it might flush out some interesting stories...
Baggy2
Third Gear
Third Gear
 
Posts: 267
Joined: 05 Feb 2010

PostPost by: elans3 » Tue Aug 20, 2024 2:11 pm

I had a look at a pair on a trade stand at Classic le Mans, years ago, after they first came out. They were truly awful at that time, would not touch them with a barge pole. For the last ten years of my working life, I traded in Historic Motorsport parts for a living, after leaving the rat race, and over that time, I must have refurbished close to a thousand individual DCOE's. In the far east ones, threads were bad, one had swarf inside, jet sizes weren't what they were supposed to be, (I could tell by eye at that point), poor gaskets, play in throttle spindles from new, everything you looked at was poor.
They may be a bit better now, but I still wouldn't go near them. A refurbed pair of 18's, 31's, or 151's are much better.
Current :- Elan S3 DHC SE S/S 1968,
1963 Alfa Giulia Ti Super Rep.
Previous :-
Elan S3 DHC SE SS 1968,
Elan S3 DHC S/E 1966
Elan S3 FHC Pre-Airflow 1966
elans3
Fourth Gear
Fourth Gear
 
Posts: 524
Joined: 12 Sep 2003

PostPost by: wdb » Tue Aug 20, 2024 2:16 pm

I have no direct experience, sorry. But I agree, caveat emptor. Might be useful as a small parts source for the real thing? Even then I'd be wary.
wdb
First Gear
First Gear
 
Posts: 25
Joined: 25 Jul 2024

Total Online:

Users browsing this forum: No registered users and 19 guests

cron