Fuel Guage
6 posts
• Page 1 of 1
Hi all,
Just trying to put the finishing touches on my Elan SE and I have a problem with my fuel guage, I have an FG2350/71 guage which requires a 0-90 ohm sender and these are not available so consequently my fuel guage is not working, I have a 6 hole sender that is 240 - 30ohms so I was wondering if anyone knew what car the fuel guage came out of that fits that particular sender? I do have a voltage stabiliser which provides a very steady 12.2volts. I thought it might be easier to get a guage to fit the sender rather that a sender?? any suggestions?
Thanks in advance.
Tonyw
Just trying to put the finishing touches on my Elan SE and I have a problem with my fuel guage, I have an FG2350/71 guage which requires a 0-90 ohm sender and these are not available so consequently my fuel guage is not working, I have a 6 hole sender that is 240 - 30ohms so I was wondering if anyone knew what car the fuel guage came out of that fits that particular sender? I do have a voltage stabiliser which provides a very steady 12.2volts. I thought it might be easier to get a guage to fit the sender rather that a sender?? any suggestions?
Thanks in advance.
Tonyw
Second childhood? no just an extension of my first.
- Tonyw
- Third Gear
- Posts: 348
- Joined: 23 Sep 2006
Hi,
You can get a replacement sender from Axminster Specialist Panels. I have one of their fuel tanks and the quality is excellent.
http://andywiltshire.com/Lotus%20Elan%20Tanks.htm
Carl
You can get a replacement sender from Axminster Specialist Panels. I have one of their fuel tanks and the quality is excellent.
http://andywiltshire.com/Lotus%20Elan%20Tanks.htm
Carl
-
pereirac - Fourth Gear
- Posts: 961
- Joined: 01 Oct 2003
Tony
" I do have a voltage stabiliser which provides a very steady 12.2volts."
shouldn't that be 10 volts
John
" I do have a voltage stabiliser which provides a very steady 12.2volts."
shouldn't that be 10 volts
John
-
john.p.clegg - Coveted Fifth Gear
- Posts: 4533
- Joined: 21 Sep 2003
6 posts
• Page 1 of 1
Total Online:
Users browsing this forum: Dan in NJ and 15 guests