ZS carbs/throttle bypass valve block-off
2 posts
• Page 1 of 1
Post by: Chrisrich » Sun Jul 27, 2008 9:54 pm
I've done this little tweak on a TR6 with good result.
Has anyone tried it on the twin cam?
Has anyone tried it on the twin cam?
1970 Elan S4 DHC 45/9780 1972 Triumph TR6
1958 Bugeye Sprite 1967 Triumph Trophy 650
1991 Ducati 900ss 1989 Honda GB500
1958 Bugeye Sprite 1967 Triumph Trophy 650
1991 Ducati 900ss 1989 Honda GB500
- Chrisrich
- Second Gear
- Posts: 112
- Joined: 12 Jul 2007
Post by: Rob_LaMoreaux » Mon Jul 28, 2008 9:20 pm
When I had the stromberg engine in the car I cranked the adjusting nut on the temperature compensator all the way down so it would never open. This allowed me to tune for it closed and then I was going to back it off so it would lean the mixture when warm, but I never got around to it. Then the dreaded right hand turn oil pickup problem bit and that engine is in the garage with the weber engine in the car.
Rob
Rob
- Rob_LaMoreaux
- Second Gear
- Posts: 173
- Joined: 22 Sep 2003
2 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 16 guests
Site map
SitemapIndex
RSS Feed