water pump
6 posts
• Page 1 of 1
Hi Guys anyone know the clearance between the impeller and the housing can't find any info in the manual.
Thanks
George
Thanks
George
George
Elan+2
Mk2 Mx5
Elan+2
Mk2 Mx5
- George S L
- Second Gear
- Posts: 93
- Joined: 28 Feb 2019
- Location: yorkshire
its shown in the manual in Engine section 23 it is 0.02 to 0.03 inch
cheers
Rohan
cheers
Rohan
-
rgh0 - Coveted Fifth Gear
- Posts: 8991
- Joined: 22 Sep 2003
- Location: Melbourne, Australia
Hi Rohan thanks for the info page 23 in the engine section in my manual deals with con rods and pistons.
Thanks
George
Thanks
George
George
Elan+2
Mk2 Mx5
Elan+2
Mk2 Mx5
- George S L
- Second Gear
- Posts: 93
- Joined: 28 Feb 2019
- Location: yorkshire
Ok Georgie,
Try "Technical Data" Page 17 in the Elan Workshop Manuel. Cooling system Impeller to water pump housing clearance 020/.030"
Alan
Try "Technical Data" Page 17 in the Elan Workshop Manuel. Cooling system Impeller to water pump housing clearance 020/.030"
Alan
Alan.b Brittany 1972 elan sprint fhc Lagoon Blue 0460E
- alan.barker
- Coveted Fifth Gear
- Posts: 3879
- Joined: 06 Dec 2008
- Location: BRITTANY FRANCE
Think I have a different manual as I can't find that either, the manual I have came with the car it's a plane black cover with loose leaf pages.
George
George
George
Elan+2
Mk2 Mx5
Elan+2
Mk2 Mx5
- George S L
- Second Gear
- Posts: 93
- Joined: 28 Feb 2019
- Location: yorkshire
[/quote]Hi Rohan thanks for the info page 23 in the engine section in my manual deals with con rods and pistons.[/quote]
In my manual Section 23 is on page 26
In my manual Section 23 is on page 26
- Baggy2
- Third Gear
- Posts: 279
- Joined: 05 Feb 2010
- Location: South East England
6 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 6 guests