Engine breather
3 posts
• Page 1 of 1
HI Jon
I don't know of any purpose made breather to fit the fuel pump block opening. If you made one it would need to have a very good oil knock out system as there is a lot oil flying around in that location. That is why most additional breathers are fitted to the front of the cam cover as most of the oil drops out in the front cover and little carries over out the breather.
cheers
Rohan
I don't know of any purpose made breather to fit the fuel pump block opening. If you made one it would need to have a very good oil knock out system as there is a lot oil flying around in that location. That is why most additional breathers are fitted to the front of the cam cover as most of the oil drops out in the front cover and little carries over out the breather.
cheers
Rohan
-
rgh0 - Coveted Fifth Gear
- Posts: 8833
- Joined: 22 Sep 2003
3 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 35 guests