T?cam Head Service Bulletin.

PostPost by: clemf » Wed Oct 29, 2003 9:41 pm

I've had a problem with excess oil from the breather pipe being sucked into the engine with the result of lots of smoke. I've heard there was a service bulletin issued in the late sixties that recommended drilling a hole in the head from the top into the breather chamber. Has anyone come across this, have any details or has got the same problem?
clemf
New-tral
 
Posts: 9
Joined: 29 Oct 2003

PostPost by: types26/36 » Wed Oct 29, 2003 10:36 pm

Clem,
Go to www.gglotus.org then to Tech section, under Twin Cam you will find an article "oil scavenging" this may be what you are looking for.
Regards Brian.
Brian
64 S2 Roadster
72 Sprint FHC
User avatar
types26/36
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 3872
Joined: 11 Sep 2003

PostPost by: clemf » Thu Oct 30, 2003 5:45 pm

:huh: Thats the right one but the diagram is so bad you can't make out the dimensions and I don't like the idea of guessing where to drill the hole !
clemf
New-tral
 
Posts: 9
Joined: 29 Oct 2003

Total Online:

Users browsing this forum: No registered users and 10 guests