Valve job in So/Cal?

[JohninCM]

Greetings board members.

This question is really intended for my 66 Lotus Cortina. I searched the forum and did not turn up an answer.

I have removed the head for replacement of the water pump. And I'd like to have the twin cam head freshened up while it's off the block. I'm hoping to learn of a recommended shop in the southern California area. Nothing too radical, most likely some valve guides and re-facing the valves.

My goal is to locate a shop with known twin cam experience and the ability to get work done in a timely manner (that might be the hard part). I really hope to avoid the 6 month valve job (or worse).

So does anyone have a shop the can recommend?

Thanks in advance.

John

[oldokie]

Claudius did a couple for me years ago. www.lotusPBC.com

[dlbarnes1]

Check with Dave Bean. They can probably refer you to someone in your area that they have supplied parts to.
Dave 72 Sprint DHC

[JohninCM]

Thanks guys. I now have a few tips to check up on. I'm sure one of them will work out.

Just in case anyone is interested here is a link to some photos I took the day I bought the Cortina three years ago.

http://pages.sbcglobal.net/johnincm/_wsn/page3.html

John