Oil catch tank

[vernon.taylor]

Salut Gordon

The output of the filter goes to the usual carb box entry. I used reinforced tube here to avoid kinks in the sharp bends. The Webers have a protruding bolt that gets in the way so I used a 16mm copper bend/reducer.

This is the filter I bought:

http://www.uxcell.com/af200002-alloy-pn ... 15536.html

They sell on eBay, too. I found similar filters in DIY shops, but a lot more expensive (in France) - anywhere that sells compressed air equipment should have them.

1/2" connectors from here:

http://www.t-mex.co.uk/

... but again you should be able to find something adequate from a compressed air supplier.

@+

Vernon