loosing my bearings

PostPost by: tdafforn » Fri Dec 22, 2006 12:49 pm

Can't possibly commet :lol:
These are very smooth and look like ball bearings to me!!
Tim
User avatar
tdafforn
Fourth Gear
Fourth Gear
 
Posts: 744
Joined: 12 Sep 2003

PostPost by: 1964 S1 » Sat Dec 23, 2006 2:46 am

So, you guys agree? They're mass dampers?
1964 S1
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1294
Joined: 15 Sep 2003

PostPost by: john.p.clegg » Sat Dec 23, 2006 7:35 am

Tim

Well with global warming and the mild winter we're having you can discount having to look around for the soprano monkeys....

John :wink:
User avatar
john.p.clegg
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 4523
Joined: 21 Sep 2003

PostPost by: tdafforn » Sat Dec 23, 2006 5:32 pm

john, very true considering how cold it was during the week when I was pulling the engine!
User avatar
tdafforn
Fourth Gear
Fourth Gear
 
Posts: 744
Joined: 12 Sep 2003

PostPost by: tdafforn » Sun Mar 11, 2007 1:58 pm

Discovered where the ball bearings have come from. The clutch thrust? bearing just came apart in my hands as I tried to remove it!
Tim
User avatar
tdafforn
Fourth Gear
Fourth Gear
 
Posts: 744
Joined: 12 Sep 2003

PostPost by: types26/36 » Sun Mar 11, 2007 3:47 pm

tdafforn wrote:Discovered where the ball bearings have come from. The clutch thrust? bearing just came apart in my hands as I tried to remove it!
Tim


Quote Tim"Release bearing seemed fine when I ran the car last summer.
Haven't had a chance to look at it since the engine came out, will have a look tomorrow"



You threw a bad dice! you have just got the "go to jail card" or at least back to start!
(I laid awake at night wondering where these balls came from ):shock:
Brian
64 S2 Roadster
72 Sprint FHC
User avatar
types26/36
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 3406
Joined: 11 Sep 2003

PostPost by: tdafforn » Sun Mar 11, 2007 5:29 pm

Now I'm really worried....
Someone lying await at night thinking about my balls!!
Anyhow, the bearing look fine by eye, then I climbed into the engine bay (minus engine) to get to the lighting circuit I am trying to update. and touched the bearing and it literally fell to peices...
Talk about a wing and a prayer!
Tim
User avatar
tdafforn
Fourth Gear
Fourth Gear
 
Posts: 744
Joined: 12 Sep 2003
Previous

Total Online:

Users browsing this forum: No registered users and 20 guests