Fitting Engine

[patrics]

Hi, just a couple of photos fitting the engine.
Nothing clever to see, just use a electric hoist and sling

Regards
Steve

[wdb]

Does the sling go all the way under the engine?

[patrics]

Hi,
Yes, that is just one continuous sling and both sides sit together on the shallow side of the sump - not the reservoir bit.

Regards
Steve

[skelteanema]

I see you fitted the carbs before installing the engine. Did this pose any problems ? I didn't put the carbs on till after the engine was installed.

[patrics]

Hi,
No it wasn't a problem with the carbs fitted but I should point out I have a removable cross brace - there is another post with photos of that.

Regards
Steve