Mystery Bolts.
4 posts
• Page 1 of 1
Hi there. Hoping someone may be kind enough to help me. In my box of engine bits I've found four unidentified bolts. I assumed they were for a pulley or something of that nature but it would appear not.
I've included photo with pitch and length.
Thanks a lot for any suggestions!
I've included photo with pitch and length.
Thanks a lot for any suggestions!
- dlb123
- First Gear
- Posts: 48
- Joined: 19 Jan 2017
They look like fine threads - the only fine threads I can think of in the LTC are the con rod bolts and the three through-bolts and nuts for the water pump front to back covers - they're definitely not any of those bolts!
Water pump pulley to flange are supposed to be 1/4" UNC.
They're known as "worry-bolts" - they're only in the box to worry you, they serve no other purpose!!![Laughing :lol:](https://lotuselan.net/forums/images/smilies/icon_lol.gif)
Water pump pulley to flange are supposed to be 1/4" UNC.
They're known as "worry-bolts" - they're only in the box to worry you, they serve no other purpose!!
![Laughing :lol:](https://lotuselan.net/forums/images/smilies/icon_lol.gif)
-
promotor - Fourth Gear
- Posts: 824
- Joined: 16 Mar 2012
Haha thanks a lot for the responses. I finally figured out they're from the gearbox mounting to chassis. I was somewhat reassured by the fact they had some muck / corrosion on them, and therfore assumed it was they would be external. Phew!
Thanks again.
David
Thanks again.
David
- dlb123
- First Gear
- Posts: 48
- Joined: 19 Jan 2017
4 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 27 guests