Oil filler cap seal leaking
9 posts
• Page 1 of 1
Post by: ericbushby » Tue Oct 12, 2021 7:47 am
I am having trouble with the filler cap on the cam cover leaking.
i have not yet found the correct three eared cap and so far I have avoided buying the reproduction one.
This cheapo `tin pot` cap has worked very well for ten years but is now leaking.
I have cut a few seals out of various materials but with only short term success.
Can you suggest a source for the correct seal or suggest what material to make one from.
The search facility on this forum is still not working.
I have checked ebay and the local car parts shop and I have oil deflector plate over the No4 cam.
Any advice will be welcome
Eric in Burnley
1967 S3SE DHC
- ericbushby
- Coveted Fifth Gear
- Posts: 1352
- Joined: 13 Jun 2011
Post by: pharriso » Tue Oct 12, 2021 10:21 am
Eric, I bought replacement seals from QED (part # 103029) https://qedmotorsport.co.uk/product/oil-filler-cap-seal/ but that did not completely solve the issue.
Strange, that did solve the issue for me...
Not my original idea, copied from John Clegg & others...
Feel free to copy the design...
ericbushby wrote:..... and I have oil deflector plate over the No4 cam.
Strange, that did solve the issue for me...
Not my original idea, copied from John Clegg & others...
Feel free to copy the design...
CylinderHeadOilSplashplate.pdf- (75.48 KiB) Downloaded 216 times
Phil Harrison
1972 Elan Sprint 0260K
1972 Elan Sprint 0260K
-
pharriso - Coveted Fifth Gear
- Posts: 3186
- Joined: 15 Sep 2010
Post by: ericbushby » Tue Oct 12, 2021 4:29 pm
Thanks Phil, I have ordered a couple.
Eric
Eric
- ericbushby
- Coveted Fifth Gear
- Posts: 1352
- Joined: 13 Jun 2011
Post by: h20hamelan » Tue Oct 12, 2021 5:38 pm
I have gone to silicone on my NA and boosted vehicles.
$2 or £1 because they dont distort like rubber.
$2 or £1 because they dont distort like rubber.
Born, and brought home from the hospital (no seat belt (wtf)) in a baby!
Find out where the limits are, and start from there
Love your Mother
Earth
Find out where the limits are, and start from there
Love your Mother
Earth
-
h20hamelan - Coveted Fifth Gear
- Posts: 1957
- Joined: 25 Sep 2010
Post by: Quart Meg Miles » Tue Oct 12, 2021 10:18 pm
Off piste: How long does it take to fill the sump with an oil deftector like that fitted? It's bad enough without.
Meg
26/4088 1965 S1½ Old and scruffy but in perfect working order; the car too.
________________Put your money where your mouse is, click on "Support LotusElan.net" below.
26/4088 1965 S1½ Old and scruffy but in perfect working order; the car too.
________________Put your money where your mouse is, click on "Support LotusElan.net" below.
-
Quart Meg Miles - Coveted Fifth Gear
- Posts: 1170
- Joined: 03 Oct 2012
Post by: john.p.clegg » Wed Oct 13, 2021 7:46 am
A few photos, just a small shaped piece of Ali ( Aluminium,Aluminum )
John
- oil1.jpg (115.41 KiB) Viewed 1194 times
- oil2.jpg (136.79 KiB) Viewed 1194 times
John
-
john.p.clegg - Coveted Fifth Gear
- Posts: 4533
- Joined: 21 Sep 2003
Post by: ericbushby » Sat Oct 23, 2021 2:26 pm
Thankyou Phil, That`s fixed it.
I bought two of the seals you suggested and had to fit both to obtain a satisfactory fit. I assume that was because the cap is rubbish from China. Another leak stopped. OK for now.
Eric in Burnley
1967 S3SE DHC
I bought two of the seals you suggested and had to fit both to obtain a satisfactory fit. I assume that was because the cap is rubbish from China. Another leak stopped. OK for now.
Eric in Burnley
1967 S3SE DHC
- ericbushby
- Coveted Fifth Gear
- Posts: 1352
- Joined: 13 Jun 2011
9 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 33 guests
Site map
SitemapIndex
RSS Feed