Rope seal substute
12 posts
• Page 1 of 1
I have an early s3 Elan with a rope seal. I installed a white type seal and it creates a serious drag when I turn the engine buy hand. I have read where a Pontiac rear seal has been used to replace the normal kit seals we get. Does anyone have information on the Best Gasket item # for this seal. There has also been comments on a Kevlar reinforced type of replacement seal. Does anyone have information on where to get this seal material.
Regards Gary
Regards Gary
- ghf
- New-tral
- Posts: 2
- Joined: 12 Dec 2020
Try Keith Franck at vintage technology garage.
Most of Keith’s work is with carburettors, but he also runs this other site, and he is pretty sure he has a good result on his Elan with the type of seal you are looking for.
Keith is in the San Francisco area.
Hope this helps,
Richard Hawkins
Most of Keith’s work is with carburettors, but he also runs this other site, and he is pretty sure he has a good result on his Elan with the type of seal you are looking for.
Keith is in the San Francisco area.
Hope this helps,
Richard Hawkins
- RichardHawkins
- Coveted Fifth Gear
- Posts: 1275
- Joined: 05 Jul 2008
Thanks Rob, ordered one.
Keith Franck's io topic:
https://vintagetechnologygarage.groups. ... 0,61949714
Henry
69 Elan S4
65 Seven S2
69 Elan S4
65 Seven S2
- SENC
- Coveted Fifth Gear
- Posts: 1018
- Joined: 30 Dec 2015
https://vintagetechnologygarage.groups.io
if that doesn't work, search for io groups and vintage technology garage
once in a messages a search for rope seal will bring up posts within on the topic - one includes a good article about the Best Gasket product Rob suggested.
if that doesn't work, search for io groups and vintage technology garage
once in a messages a search for rope seal will bring up posts within on the topic - one includes a good article about the Best Gasket product Rob suggested.
Henry
69 Elan S4
65 Seven S2
69 Elan S4
65 Seven S2
- SENC
- Coveted Fifth Gear
- Posts: 1018
- Joined: 30 Dec 2015
el-saturn wrote:my s3 got an s4 sump and the rear ally bit and the s4 or sprint seals -------- but purists have telescopic mirrors to check their pals originality and dont dare to do so - racers dont............................
racers do, too, around here ... or they'll have to run with period H cars as rope seal is compulsory under period F FIA rules
S4SE 36/8198
-
nmauduit - Coveted Fifth Gear
- Posts: 2000
- Joined: 02 Sep 2013
el-saturn wrote:my s3 got an s4 sump and the rear ally bit and the s4 or sprint seals -------- but purists have telescopic mirrors to check their pals originality and dont dare to do so - racers dont............................
...and don’t forget the 6 bolt crank!
I did this conversion 3 years ago after losing the will to live with rope seals over many years with the last two Elans I have owned!
Malcolm
1966 Elan S3 Coupe
1994 Caterham 7
1994 Caterham 7
- englishmaninwales
- Fourth Gear
- Posts: 710
- Joined: 26 Jul 2013
12 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 20 guests