Inlet manifold measurement question...does anyone know....
6 posts
• Page 1 of 1
Post by: berni29 » Mon Dec 05, 2005 2:39 am
Hi Guys
I know that on the inlet castings the inlet centres for 1&2 and 3&4 are 90mm apart as per the weber or delorto carbs, but what is the centre to centre measurement between inlets 2&3?
Many thanks
Berni
I know that on the inlet castings the inlet centres for 1&2 and 3&4 are 90mm apart as per the weber or delorto carbs, but what is the centre to centre measurement between inlets 2&3?
Many thanks
Berni
Zetec+ 2 under const, also 130S. And another 130S for complete restoration. Previously Racing green +2s with green tints. Yellow +2 and a couple of others, all missed. Great to be back 04/11/2021 although its all starting to get a bit out of control.
-
berni29 - Fourth Gear
- Posts: 825
- Joined: 10 Mar 2004
Post by: john.p.clegg » Mon Dec 05, 2005 6:43 am
Berni
Measuring them in situ they appear to be 100mm(approx) but don't take my word for it
John
Measuring them in situ they appear to be 100mm(approx) but don't take my word for it
John
-
john.p.clegg - Coveted Fifth Gear
- Posts: 4522
- Joined: 21 Sep 2003
Post by: john.p.clegg » Mon Dec 05, 2005 4:05 pm
Nice one Martin
John
John
-
john.p.clegg - Coveted Fifth Gear
- Posts: 4522
- Joined: 21 Sep 2003
Post by: berni29 » Tue Dec 06, 2005 11:50 pm
Hi Guys....
Many thanks for your help!
Berni
Many thanks for your help!
Berni
Zetec+ 2 under const, also 130S. And another 130S for complete restoration. Previously Racing green +2s with green tints. Yellow +2 and a couple of others, all missed. Great to be back 04/11/2021 although its all starting to get a bit out of control.
-
berni29 - Fourth Gear
- Posts: 825
- Joined: 10 Mar 2004
6 posts
• Page 1 of 1
Total Online:
Users browsing this forum: SENC and 43 guests
Site map
SitemapIndex
RSS Feed