Rev Counter Dial
7 posts
• Page 1 of 1
I have been running my71 Sprint for the last 34 years so I am fairly at ease with it. The rev counter works fine some of the time but will fluctuate wildly at others. It has done this for some time now. I have changed to an alternator over the last 2.5 years, but from memory it was the same before the conversion. I am now wondering if I should cheque any wireing before sending the unit to speedy for repairs.
Peter
Peter
- PeterDraper
- New-tral
- Posts: 14
- Joined: 07 Mar 2007
Peter,
Did you upgrade to electronic ignition? If so, did the tach start acting up at that point in time?
Did you upgrade to electronic ignition? If so, did the tach start acting up at that point in time?
Frank Howard
'71 S4 SE
Minnesota
'71 S4 SE
Minnesota
- Frank Howard
- Fourth Gear
- Posts: 919
- Joined: 30 Mar 2004
Thank you for your prompt reply Frank, in truth I do not rember when it started but at least three seasons ago. I did no mods to the Electronic ing system after installing the alt. I know it reads at least 500 high when steady.
Peter
Peter
- PeterDraper
- New-tral
- Posts: 14
- Joined: 07 Mar 2007
Peter if you electronic ignition fitted that will be the cause the tacho is current driven(RVI) and the current flow in what used to be the points cicuit is a lot less with electronic ignition & gives unreliable operation. You could convert tacho to voltage driven(RVC) i just put up with mine
Ian
Ian
- elansprint
- Third Gear
- Posts: 431
- Joined: 12 Sep 2003
Thanks Ian that is just what I have been doing. I will think about an upgrade come the winter
Many thanks
Peter
Many thanks
Peter
- PeterDraper
- New-tral
- Posts: 14
- Joined: 07 Mar 2007
Peter,
Before you send it out for a conversion, think about this. Practically every car manufactured in the last 25 years came from the factory with electronic ignition. A good portion of them, probably half, have tachometers. Do you have access to a junk yard?
Before you send it out for a conversion, think about this. Practically every car manufactured in the last 25 years came from the factory with electronic ignition. A good portion of them, probably half, have tachometers. Do you have access to a junk yard?
Frank Howard
'71 S4 SE
Minnesota
'71 S4 SE
Minnesota
- Frank Howard
- Fourth Gear
- Posts: 919
- Joined: 30 Mar 2004
If it really is intermittent the problem may be ignition wiring.
I have electronic ignition (Alyson unit - in the car when I got it) and have suffered intermittent misbehaviour of the tacho from time to time. Aside from once being caused by coil failing and once by a cracked plug ceramic, I have always been able to rectify by thoroughly checking, cleaning and securely connecting all leads from/to the solenoid, coil, ignition switch, tach, distributor and plugs.
I have electronic ignition (Alyson unit - in the car when I got it) and have suffered intermittent misbehaviour of the tacho from time to time. Aside from once being caused by coil failing and once by a cracked plug ceramic, I have always been able to rectify by thoroughly checking, cleaning and securely connecting all leads from/to the solenoid, coil, ignition switch, tach, distributor and plugs.
Elliott - 70 S4 dhc
-
ElliottN - Second Gear
- Posts: 171
- Joined: 19 Apr 2004
7 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 48 guests