displacement??

PostPost by: foggy » Mon Oct 30, 2006 4:54 pm

What is bore and stroke of '66-'67 Rope seal motor, anyone? thanks
foggy
New-tral
 
Posts: 11
Joined: 09 Dec 2004

PostPost by: Elan45 » Mon Oct 30, 2006 6:09 pm

Same as a lip seal motor.
Elan45
Fourth Gear
Fourth Gear
 
Posts: 953
Joined: 23 Nov 2008

PostPost by: Frank Howard » Mon Oct 30, 2006 6:24 pm

Bore: 3.25-3.2512 inches
Stroke: 2.864 inches

OR

Bore: 82.55mm-82.58mm
Stroke: 72.746mm

From the factory, they were all the same except for the first few which had
1500cc motors which in turn were bought back by the factory for use in their
23B racing effort.

Frank Howard
Frank Howard
'71 S4 SE
Minnesota
Frank Howard
Fourth Gear
Fourth Gear
 
Posts: 919
Joined: 30 Mar 2004

Total Online:

Users browsing this forum: No registered users and 35 guests