Spring Compressor Design/Drawing/Plans

PostPost by: elangtv2000 » Mon Sep 04, 2006 10:11 pm

Hello group,
I have found one drawing of a front spring compressor in the archives, and was wondering two things; is the front spring held by a top retainer that comes off when the assembly is removed from the chassis, or is it held captive and the shock/spring removed from the chassis as a unit?
Also, does anyone have any other design for a spring compressor they would be willing to share?
Many thanks,
Greg
'71 Elan S4
User avatar
elangtv2000
Third Gear
Third Gear
 
Posts: 225
Joined: 07 Jun 2006

PostPost by: john.p.clegg » Tue Sep 05, 2006 5:45 am

Greg
The front spring is held captive by a split retaining ring (surely not the correct technical term.) and can be removed from the car complete then stripped

John :wink: .
User avatar
john.p.clegg
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 4521
Joined: 21 Sep 2003

PostPost by: types26/36 » Tue Sep 05, 2006 8:52 am

elangtv2000 wrote:Also, does anyone have any other design for a spring compressor they would be willing to share?


Well not so much as a design as an improvisation, an old brake disc, a bolt on wheel (Elan/Europa) a couple of M10 screwed rods and nuts & washers.
Attachments
lotus spring compressor 1.JPG and
lotus spring compressor 2.JPG and
Brian
64 S2 Roadster
72 Sprint FHC
User avatar
types26/36
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 3402
Joined: 11 Sep 2003

PostPost by: Matt » Wed Sep 06, 2006 8:35 am

I made this to do my springs, they are very easy to make :wink:

Matt
Attachments
clamp.jpg and
1967 Elan S3
1970 Elan S4 Sprint
1972 Europa TC
1973 Elan +2 s130/5
1978 Esprit S1
1981 Esprit S2.2
Matt
Second Gear
Second Gear
 
Posts: 102
Joined: 02 Aug 2005

Total Online:

Users browsing this forum: No registered users and 13 guests