Ignition system
1 post
• Page 1 of 1
Hi,
Whilst I put my car back together I have taken a few photos
Anyway this the ignition system and at the time was described as a Sierra Cosworth Group A system.
I used to have one of those ignitor type which goes inside the distributer but when on the rolling road try to find a problem you could see the ignitor type starting to break down so I fitted this. Have to say this was night and day better, on a cold start-up the engine would immediately be able to idle.
This a race car hence where I have put it.
Regards
Steve
Whilst I put my car back together I have taken a few photos
Anyway this the ignition system and at the time was described as a Sierra Cosworth Group A system.
I used to have one of those ignitor type which goes inside the distributer but when on the rolling road try to find a problem you could see the ignitor type starting to break down so I fitted this. Have to say this was night and day better, on a cold start-up the engine would immediately be able to idle.
This a race car hence where I have put it.
Regards
Steve
- patrics
- Fourth Gear
- Posts: 534
- Joined: 21 Sep 2003
1 post
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 6 guests