Removing anti-theft switch

[JeffP]

Many thanks to all who helped me to find the right diagram for my early 1969 Elan Plus2 (50/1510).

I want to remove the anti-theft switch. It has a red/green to ignition switch a red/green to the tach and a purple/black to the horn.

I think you simply connect the red/greens together this then feeds the coil through the tach and just isolate or take out the purple/black to the horn.

Any problems with this? Other suggestions gratefully received.

[ncm]

Sounds good to me. Probably no need to remove the horn wire unless you wish to remove the switch altogether.

Brian.