+2 solenoid to coil
2 posts
• Page 1 of 1
Hello
Elan +2 130 5
I have two wires going to the coil
A white
A white and yellow
The white comes from the tachograph I think... according to the book.
The white and yellow comes from the solenoid.
I have there questions
1) the white going to the coil : positive or negative ?
2) the white and yellow to the coil: positive or negative ?
3) the white and yellow at the solenoid end... which terminal ?
I have the two post terminals. One for the positive feed from the battery. The other for the starter feed.
In the middle I have two spade connectors. Looking at the bulkhead I have one on the right (white and red) and an unused terminal on the left middle and one unused terminal on the positive post...
Elan +2 130 5
I have two wires going to the coil
A white
A white and yellow
The white comes from the tachograph I think... according to the book.
The white and yellow comes from the solenoid.
I have there questions
1) the white going to the coil : positive or negative ?
2) the white and yellow to the coil: positive or negative ?
3) the white and yellow at the solenoid end... which terminal ?
I have the two post terminals. One for the positive feed from the battery. The other for the starter feed.
In the middle I have two spade connectors. Looking at the bulkhead I have one on the right (white and red) and an unused terminal on the left middle and one unused terminal on the positive post...
-
LaikaTheDog - Third Gear
- Posts: 333
- Joined: 29 Oct 2003
1) Positive (ballast resistor on coil).
2) Positive.
3) Left middle (live whilst cranking only)
Dougal.
2) Positive.
3) Left middle (live whilst cranking only)
Dougal.
- dougal9887
- Third Gear
- Posts: 254
- Joined: 23 Aug 2013
2 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 40 guests