Lotus Elan

Tachometer troubles

PostPost by: KevJ+2 » Sun Mar 29, 2015 3:06 pm

Well....today I have tried to test the new spiyda board, step by step as per videos.
I have absolutely no movement on the tacho when connected. As advised, I swapped over the black and reds as shown but nothing!
I have checked all I can with a meter and full 12 volts is getting to the board via a good battery. The Hz signal from my laptop was also connected at full volume. Has anyone had this problem?
Any suggestions as to what to check further would be appreciated.
Kev.
KevJ+2
Fourth Gear
Fourth Gear
 
Posts: 819
Joined: 23 Aug 2013

PostPost by: tonyr27 » Sun Mar 29, 2015 3:50 pm

Kev I bought one and I sent a message for advice. Chris contacted us more a less straightaway. I would get in touch he's very helpful.

TonyR
1968 Plus 2 Cirrus White
1966 S3 FHC Medici Blue
tonyr27
Second Gear
Second Gear
 
Posts: 150
Joined: 02 Sep 2013
Location: South Yorkshire

PostPost by: KevJ+2 » Mon Mar 30, 2015 12:32 pm

Thanks Tony,
I talked to Chris and apparently my tacho movement is to blame, so I am now after a replacement (see wanted section).
:(
KevJ+2
Fourth Gear
Fourth Gear
 
Posts: 819
Joined: 23 Aug 2013
Previous

Total Online:

Users browsing this forum: No registered users and 17 guests