Lotus Elan

wiper speed sequence

PostPost by: rdssdi » Sun Mar 04, 2007 1:14 am

I have just completed the wiring on my +2. The wiper switch goes from park (off) position to high then to slow. is this the corrct sequence?

Bob
rdssdi
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1421
Joined: 30 Sep 2003

PostPost by: john.p.clegg » Sun Mar 04, 2007 7:03 am

No


John :wink:
User avatar
john.p.clegg
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 5709
Joined: 21 Sep 2003
Location: Manchester

PostPost by: Frank Howard » Sun Mar 04, 2007 4:28 pm

Bob,

Most likely, you have the rocker switch wired incorrectly. Looking at the back of the switch there should be 4 connections. They are as follows:

Top Left - White/Light Green
Top Right - Brown/Light Green
Bottom Left - Red/Light Green
Bottom Right - Blue/Light Green

Hope this helps.
Frank Howard
'71 S4 SE
Minnesota
Frank Howard
Fourth Gear
Fourth Gear
 
Posts: 994
Joined: 30 Mar 2004

Total Online:

Users browsing this forum: No registered users and 14 guests