Tail light housing bolts
3 posts
• Page 1 of 1
Hex head and they are "set screws" + big flat washer + spring washer.
Alan
Alan
Alan.b Brittany 1972 elan sprint fhc Lagoon Blue 0460E
- alan.barker
- Coveted Fifth Gear
- Posts: 3827
- Joined: 06 Dec 2008
I've gone with internal hex bolts, that way I can get the Allen key onto the head of it. I modified the reverse light bulb metal shroud to get the bolt in after the shroud is rivited in place.
I made plates to retain the light housing against the body as the curve of the rear made it difficult to use a large flat washer.
All seemed to work okay.
I made plates to retain the light housing against the body as the curve of the rear made it difficult to use a large flat washer.
All seemed to work okay.
- Bud5000
- Second Gear
- Posts: 67
- Joined: 04 Jul 2023
3 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 12 guests