Horn compressor
3 posts
• Page 1 of 1
Post by: Steve Brooks » Fri Nov 05, 2021 11:59 am
Hello Chaps, having read a similar thread about a week ago I thought it was time to see if the Fiamm horn compressor I bought cheap of E..y would work.And to no suprise it did not,after a strip down and clean still no show. But if I reverse the + and - perfection, what is all that about ?
Steve
Thanks Guys
Steve
Thanks Guys
Last edited by Steve Brooks on Fri Nov 05, 2021 10:07 pm, edited 1 time in total.
72 Elan +2S 130/5
- Steve Brooks
- Second Gear
- Posts: 67
- Joined: 08 Oct 2014
Post by: Andy8421 » Fri Nov 05, 2021 9:20 pm
DC motors are bi-directional - reverse the polarity of the supply and the motor runs the opposite way.
The Fiamm compressor is a 'sliding vane' design, and has to rotate in the correct direction to work. Connect the motor the wrong way around, it goes in reverse and doesn't pump air. Link below explains it all.
https://blog.exair.com/2018/01/11/about-sliding-vane-air-compressors/
The Fiamm compressor is a 'sliding vane' design, and has to rotate in the correct direction to work. Connect the motor the wrong way around, it goes in reverse and doesn't pump air. Link below explains it all.
https://blog.exair.com/2018/01/11/about-sliding-vane-air-compressors/
68 Elan S3 HSCC Roadsports spec
71 Elan Sprint (still being restored)
32 Standard 12
Various modern stuff
71 Elan Sprint (still being restored)
32 Standard 12
Various modern stuff
- Andy8421
- Coveted Fifth Gear
- Posts: 1222
- Joined: 27 Mar 2011
3 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 38 guests
Site map
SitemapIndex
RSS Feed