Electric Aerials

PostPost by: AHM » Fri Aug 24, 2012 3:41 pm

Does anyone have any experience with electric aerials?

I need 2 aerials and was thinking about installing electric aerials, but my only experience in the past was of one that was cheap and noisy.

Are there any issues with Positive earth?

Thanks,

Simon
AHM
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1258
Joined: 19 Apr 2004

PostPost by: john.p.clegg » Fri Aug 24, 2012 4:00 pm

Simon

I like the idea of symmetry but why two? Are you going to fit twin exhaust pipes?

John :wink:
User avatar
john.p.clegg
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 4533
Joined: 21 Sep 2003

PostPost by: Jason1 » Fri Aug 24, 2012 4:25 pm

I like the idea of symmetry but why two? Are you going to fit twin exhaust pipes?


Maybe for headlight pop-ups?
50/0951 1968 Wedgewood blue +2, 1990 Mini Cooper RSP
User avatar
Jason1
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1349
Joined: 03 Nov 2005

PostPost by: ardee_selby » Fri Aug 24, 2012 4:33 pm

I had an electric aerial & swapped it over a couple of cars. Whilst cheap and noisy it worked well enough as long as mast was cleaned & lubed frequently.

I discounted it for the Elan though: 1.0 Intrusion into the boot space 2.0 Need to anchor (where? how?) the mechanism (quite a lump!) to avoid stress cracking around the mounting hole.

Apart from that...

Richard
ardee_selby
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1090
Joined: 30 Sep 2003

PostPost by: types26/36 » Fri Aug 24, 2012 5:08 pm

I have an electric aerial on the S2 (although I took the radio out a while ago...bit of a waste of time IMHO) it is noisy which is no big deal and at least you know its going up or down :roll:
At the moment I have the two way switch connected to an in line electric fuel pump to fill the carbs after the car has stood for a long time......couldn't be bothered to fit an other switch for the pump.
The aerial still goes up and down while the pump ticks away :lol:
Attachments
S2 ELECT aerial 2 (Copy).JPG and
S2 ELECT aerial 001 (Copy).JPG and
S2 ELECT 3 (Copy).JPG and
Brian
64 S2 Roadster
72 Sprint FHC
User avatar
types26/36
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 3407
Joined: 11 Sep 2003

PostPost by: AHM » Fri Aug 24, 2012 5:50 pm

Jason1 wrote:
I like the idea of symmetry but why two? Are you going to fit twin exhaust pipes?


Maybe for headlight pop-ups?
john.p.clegg wrote:Simon

I like the idea of symmetry but why two? Are you going to fit twin exhaust pipes?

John :wink:


Maybe one for each car...
AHM
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1258
Joined: 19 Apr 2004

PostPost by: fatboyoz » Sat Aug 25, 2012 2:26 am

Simon,
How about something like this?
http://www.kapscomoto.com/product_p/tlb1800.htm
Colin.


AHM wrote:Does anyone have any experience with electric aerials?

I need 2 aerials and was thinking about installing electric aerials, but my only experience in the past was of one that was cheap and noisy.

Are there any issues with Positive earth?

Thanks,

Simon
'68 S4 DHC
fatboyoz
Fourth Gear
Fourth Gear
 
Posts: 631
Joined: 04 Oct 2003

PostPost by: JJDraper » Sat Aug 25, 2012 8:07 am

This site is worth a browse.. Quality comes at a price though.

http://www.hirschmann-car.com/English/p ... ndex.phtml

Jeremy
User avatar
JJDraper
Fourth Gear
Fourth Gear
 
Posts: 923
Joined: 17 Oct 2004

PostPost by: bob_rich » Sun Aug 26, 2012 11:17 am

Hi Folks

I am wondering about aerials and the fact that they are fragile, can break ( or be broken ) off, or produce stress cracks, and consume boot space. like most of the other posters comment My car is a +2S so I have been wondering about using one or more of the headlining rods as an aerial ( could have 5 aerials then!) this could also be done on a fixed head which I assume has a similar method of holding the headlining.

The idea should work because of the fibre glass body. On the drop heads it would be possible to put some exposed wire or copper tape on the inside of doors or the underside of the boot--not the bonnet would pick up the ignition noise.

will try some of the ideas when I get to that stage in my rebuild Dont think I would rip out the headlining to try it but as mine is striped out will have a go later on and report how it works-- unless someone has tried it and can comment on it.

cheers

Bob
bob_rich
Fourth Gear
Fourth Gear
 
Posts: 555
Joined: 06 Aug 2009

PostPost by: mikealdren » Mon Aug 27, 2012 7:28 am

Hi Simon,
I assume you mean electrically 'noisy' rather than mechanically noisy when raising and lowering.

I've had an electrical aerial on my +" and it works excellently, make sure it's earthed properly. From memory of many years ago, there were aerials made down to a price and some of good quality!

Mike
mikealdren
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1194
Joined: 26 Aug 2006

PostPost by: vernon.taylor » Mon Aug 27, 2012 10:26 am

Salut Simon

I recently bought a nice aerial from carmastsuk (or something like that) who also sell on eBay. They also have replacement masts if you have an accident. Mine is switched by the ignition feed to the radio - +ve 12V - something to ask about if you go that route.

@+

Vernon
User avatar
vernon.taylor
Fourth Gear
Fourth Gear
 
Posts: 683
Joined: 05 Nov 2010

Total Online:

Users browsing this forum: No registered users and 44 guests