Drive shaft length
3 posts
• Page 1 of 1
Post by: TWebb » Sun Jan 29, 2023 5:43 pm
It appears I was provided with an incorrect drive shaft. Does anyone out there know the standard length of an Elan driveshaft?
For background, the seller had removed the motor and driveshaft when I picked up the car. In the spares box was what I believed was the proper driveshaft. It was not.
He has a number of driveshafts in his race shop. Trying to shortcut the problem by being sure what he sends is the correct length, has the correct flange, and spline pattern.
Thanks
For background, the seller had removed the motor and driveshaft when I picked up the car. In the spares box was what I believed was the proper driveshaft. It was not.
He has a number of driveshafts in his race shop. Trying to shortcut the problem by being sure what he sends is the correct length, has the correct flange, and spline pattern.
Thanks
- TWebb
- Second Gear
- Posts: 127
- Joined: 28 Oct 2003
Post by: alan.barker » Sun Jan 29, 2023 6:01 pm
Have a look at past post but use "propshaft" uk. 570mm
Alan
Alan
Alan.b Brittany 1972 elan sprint fhc Lagoon Blue 0460E
- alan.barker
- Coveted Fifth Gear
- Posts: 3756
- Joined: 06 Dec 2008
Post by: SENC » Sun Jan 29, 2023 6:12 pm
Some discussion on a similar topic in this thread - may be of use to you.
viewtopic.php?f=37&t=44105&start=60
viewtopic.php?f=37&t=44105&start=60
Henry
69 Elan S4
65 Seven S2
69 Elan S4
65 Seven S2
- SENC
- Coveted Fifth Gear
- Posts: 1018
- Joined: 30 Dec 2015
3 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 20 guests
Site map
SitemapIndex
RSS Feed