Differential shims
3 posts
• Page 1 of 1
Post by: seniorchristo » Fri Sep 03, 2021 6:07 pm
Does anyone know if the conical and flat shims are available for the spider and side gears in the Elan differential?
Thanks
Chris
Thanks
Chris
67 Elan Super Safety
67 Elan +2
67 Elan +2
- seniorchristo
- Fourth Gear
- Posts: 590
- Joined: 19 Dec 2013
Post by: Elan45 » Sat Sep 04, 2021 11:02 pm
Chris,
I'd try Burtons in the east end of London. Barring that, I dunno.
Roger
I'd try Burtons in the east end of London. Barring that, I dunno.
Roger
'67 Elan S3 SS DHC
'67 Elan FHC pre-airflow
'67 Elan S3 SE upgrade to 26R by Original owner
'58 Eleven S2 (ex-works)
'62 20/22 FJ (ex-Yamura)
'70 Elan +2S RHD
'61 20 FJ project
'76 Modus M1 F3
'67 Elan FHC pre-airflow
'67 Elan S3 SE upgrade to 26R by Original owner
'58 Eleven S2 (ex-works)
'62 20/22 FJ (ex-Yamura)
'70 Elan +2S RHD
'61 20 FJ project
'76 Modus M1 F3
- Elan45
- Fourth Gear
- Posts: 957
- Joined: 23 Nov 2008
Post by: seniorchristo » Sun Sep 05, 2021 8:29 pm
Hi Roger
Thanks for the reply. Burton's doesn't list them in their catalog. I'm refreshing my 3.55 diff and measured about .030" play in side gear movement whereas my spare 3.77 has only about .010". Not sure it's a big deal but I would replace them if they were available.
Chris
Thanks for the reply. Burton's doesn't list them in their catalog. I'm refreshing my 3.55 diff and measured about .030" play in side gear movement whereas my spare 3.77 has only about .010". Not sure it's a big deal but I would replace them if they were available.
Chris
67 Elan Super Safety
67 Elan +2
67 Elan +2
- seniorchristo
- Fourth Gear
- Posts: 590
- Joined: 19 Dec 2013
3 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 21 guests
Site map
SitemapIndex
RSS Feed