Gearbox mount
3 posts
• Page 1 of 1
Post by: davidj » Thu May 11, 2017 8:13 pm
Good evening,
My car (a +2) has two disc spacers or washers about 8mm thick (from memory) sandwiched between the underside of the rear gearbox mount and the removable chassis cross member. I cannot find any reference to them in the workshop manual. Have they been added by a previous owner or original?
Thanks in advance for any advice.
David
My car (a +2) has two disc spacers or washers about 8mm thick (from memory) sandwiched between the underside of the rear gearbox mount and the removable chassis cross member. I cannot find any reference to them in the workshop manual. Have they been added by a previous owner or original?
Thanks in advance for any advice.
David
- davidj
- Third Gear
- Posts: 451
- Joined: 09 Apr 2008
Post by: Bud English » Thu May 11, 2017 8:21 pm
They belong there. They are item number 8 in the chassis section (AA).
Bud
1970 +2S Fed 0053N
"Winnemucca - says it all really!!"
1970 +2S Fed 0053N
"Winnemucca - says it all really!!"
- Bud English
- Fourth Gear
- Posts: 941
- Joined: 05 Nov 2011
3 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 18 guests
Site map
SitemapIndex
RSS Feed