Diff Torque Rod Hole Diameter
3 posts
• Page 1 of 1
Could any one please tell me what the diameter of the holes are in the diff casing which take the diff torque rods?
I've just measured the rod diameter as 11mm.
I've just measured the rod diameter as 11mm.
Steve
'64 S1 Elan (Owned since '73)
'69 Alfa Romeo 1750 Spider Veloce (Owned since '77)
'70 Morris Minor 1000 (Owned since '85)
'64 S1 Elan (Owned since '73)
'69 Alfa Romeo 1750 Spider Veloce (Owned since '77)
'70 Morris Minor 1000 (Owned since '85)
-
AlfaLofa - Third Gear
- Posts: 459
- Joined: 19 Aug 2006
Just measured an old casing and it was approx 13.5mm
Brian
64 S2 Roadster
72 Sprint FHC
64 S2 Roadster
72 Sprint FHC
-
types26/36 - Coveted Fifth Gear
- Posts: 3407
- Joined: 11 Sep 2003
Brian - thanks for that !!
I've just had a couple of sleeves fitted to a spare diff carrier - and I didn't measure the diameter before I sent the carrier away.
I am glad to say that the sleeves are indeed 13.5mm
I've just had a couple of sleeves fitted to a spare diff carrier - and I didn't measure the diameter before I sent the carrier away.
I am glad to say that the sleeves are indeed 13.5mm
Steve
'64 S1 Elan (Owned since '73)
'69 Alfa Romeo 1750 Spider Veloce (Owned since '77)
'70 Morris Minor 1000 (Owned since '85)
'64 S1 Elan (Owned since '73)
'69 Alfa Romeo 1750 Spider Veloce (Owned since '77)
'70 Morris Minor 1000 (Owned since '85)
-
AlfaLofa - Third Gear
- Posts: 459
- Joined: 19 Aug 2006
3 posts
• Page 1 of 1
Total Online:
Users browsing this forum: quaybook and 33 guests