Water temp transmitters

[worzel]

Hi

Could a kindly plus 2 owner let me know where the temp sender (I assume it's the electrically operated type) screws into the head and how long the sender is.

I've a spring modified to use an early mini type sender and matching guage but because the "reach" of the sender is short and is recessed out of the water flow I think this is causing the guage to under-read.

I was thinking of using the plus 2 type and fitting the innards of the plus 2 temp guage into the one I currently used (to keep all of the dials matching).

Many thanks in anticipation.

John

[rjaxe]

Hi John, the temp sender is fitted into the head casting below the water offtake connection, look for the brass hexagon with an electrical connector attached. I cannot tell you how long it is though.

[worzel]

Hi Richard

Thanks for the info. From the pictures the sender looks remarkably similar to the one I'm using- but of course yours might have a longer "nose" putting more of into the water stream.

John