slave cylinder
11 posts
• Page 1 of 1
Hi
Can anyone tell me where to get a genuine slave cylinder for the Elan. I am a bit unsure of the quality of ones sold by the usual outlets and eBay. I think it's Girling but not sure.
I lost fluid the other night. luckily I had some fluid in the boot and the car got me home.I have already changed the seals but its still leaking.The pipes and fittings to it are all sound but the bore of the cylinder is a bit tatty so a new one is sought
Comments if possible please
Thanks
G
Can anyone tell me where to get a genuine slave cylinder for the Elan. I am a bit unsure of the quality of ones sold by the usual outlets and eBay. I think it's Girling but not sure.
I lost fluid the other night. luckily I had some fluid in the boot and the car got me home.I have already changed the seals but its still leaking.The pipes and fittings to it are all sound but the bore of the cylinder is a bit tatty so a new one is sought
Comments if possible please
Thanks
G
- MACCA.GLM
- Second Gear
- Posts: 162
- Joined: 06 Apr 2023
Escort Twin Cam / Mexico has the same cylinder. You'll probably have more hits searching under Escort Twin Cam/ RS1600/ Mexico than under Lotus Elan. Refer link below:
https://www.burtonpower.com/girling-clu ... 67950.html
https://www.burtonpower.com/girling-clu ... 67950.html
1970 Ford Escort Twin Cam
1972 Ford Escort GT1600 Twin Cam
1980 Ford Escort 2.0 Ghia
Peugeot 505 GTI Wagons (5spdx1) (Autox1)
2022 Ford Fiesta ST.
1972 Ford Escort GT1600 Twin Cam
1980 Ford Escort 2.0 Ghia
Peugeot 505 GTI Wagons (5spdx1) (Autox1)
2022 Ford Fiesta ST.
- 2cams70
- Coveted Fifth Gear
- Posts: 2200
- Joined: 10 Jun 2015
I recently had an old Lockheed brake master cylinder rebuilt by Past Parts in Bury St Edmunds.
The bore was honed and a stainless steel liner inserted plus all new seals and the body refinished. Slightly more expensive than a new off the shelf "pattern part" from the Far East but will probably last for another 50 years.
Maybe worth giving them a call
https://www.pastparts.co.uk/services-products/
The bore was honed and a stainless steel liner inserted plus all new seals and the body refinished. Slightly more expensive than a new off the shelf "pattern part" from the Far East but will probably last for another 50 years.
Maybe worth giving them a call
https://www.pastparts.co.uk/services-products/
- TJS
- New-tral
- Posts: 13
- Joined: 08 Dec 2007
2cams70 wrote:Escort Twin Cam / Mexico has the same cylinder. You'll probably have more hits searching under Escort Twin Cam/ RS1600/ Mexico than under Lotus Elan. Refer link below:
https://www.burtonpower.com/girling-clu ... 67950.html
I bought this part in 2019, and can confirm it fits the Elan, having the correct 0.875" bore. In fact, it was identical to the cylinder I removed, with Girling lettering and part number.
-
draenog - Third Gear
- Posts: 322
- Joined: 26 Dec 2013
Personally I’m not really a fan of stainless steel liners in cylinders unless you really have to. Inserting a liner decreases the wall thickness and strength of the cylinder it’s inserted into. For a master cylinder you may get away with it but the clutch slave cylinder even without a sleeve inserted is quite thin in the wall particularly at the circlip groove.
1970 Ford Escort Twin Cam
1972 Ford Escort GT1600 Twin Cam
1980 Ford Escort 2.0 Ghia
Peugeot 505 GTI Wagons (5spdx1) (Autox1)
2022 Ford Fiesta ST.
1972 Ford Escort GT1600 Twin Cam
1980 Ford Escort 2.0 Ghia
Peugeot 505 GTI Wagons (5spdx1) (Autox1)
2022 Ford Fiesta ST.
- 2cams70
- Coveted Fifth Gear
- Posts: 2200
- Joined: 10 Jun 2015
512BB wrote:'I recently had an old Lockheed brake master cylinder rebuilt by Past Parts in Bury St Edmunds'
How much did they charge for that service?
Leslie
£80 (plus VAT) for the master cylinder and £75 each for rebuilt / replated brake callipers. Turnaround time 3 weeks, but quicker if the situation requires.
![Image](https://i.imgur.com/5ezwnsh.jpg)
![Image](https://i.imgur.com/wp7FEFf.jpg)
- TJS
- New-tral
- Posts: 13
- Joined: 08 Dec 2007
11 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 16 guests