Diff noise

PostPost by: HUL1K » Thu Jun 24, 2021 3:53 pm

Hello fellow Elan fans, I'm new to this board but have owned my Elans for 35 years...a late adopter. I'm in the process of refreshing both cars and wonder whether a diff needs attention as it makes a noticeable rumble when turned by hand. The site won't accept an MP4 video, so challenging to explain the sound better. I'd be grateful for any advice on next steps and suggestions of a good person/company in UK that could repair. I'm in Bristol.

Many thanks,
Roger
Roger

1971 Elan Sprint dhc
1966 S3 SE pre-airflow fhc
1966 S2 SE
HUL1K
New-tral
 
Posts: 3
Joined: 24 Jun 2021

PostPost by: elans3 » Fri Jun 25, 2021 6:24 pm

If the diff is full of oil, and makes a noise when the car is running on the road, then it sounds like at least the bearings need replacing. I can only recommend Promotor, who are in Chesterfield, Derbys. The owner is on here, and he has the right approach to gearbox & diff rebuilds, and there are lots of people on here that are well satisfied. If mine ever need doing, I'll be going to him for sure. He also has the correct special tools for measuring and rebuilding them.
No affiliation.
Current :- Elan S3 DHC SE S/S 1968,
1963 Alfa Giulia Ti Super Rep.
Previous :-
Elan S3 DHC SE SS 1968,
Elan S3 DHC S/E 1966
Elan S3 FHC Pre-Airflow 1966
elans3
Fourth Gear
Fourth Gear
 
Posts: 525
Joined: 12 Sep 2003

PostPost by: RichardHawkins » Fri Jun 25, 2021 6:46 pm

Roger,

Bearings tend to rumble, gears usually whine.

Hope this helps,

Richard Hawkins
RichardHawkins
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1275
Joined: 05 Jul 2008

PostPost by: mbell » Fri Jun 25, 2021 7:49 pm

HUL1K wrote: The site won't accept an MP4 video


Possibly upload a video to youtube and post link?

It does sound like it might be bearings, so probably best to get it looked over/refreshed.
'73 +2 130/5 RHD, now on the road and very slowly rolling though a "restoration"
mbell
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 2643
Joined: 07 Jun 2013

PostPost by: HUL1K » Fri Jun 25, 2021 9:12 pm

Thank you for replies and the Youtube suggestion (doh...why didn't I think of that?). Have posted a 20s video here:

https://youtu.be/zy77ZHHfEYQ

I have read good reports of Promotor on this forum but cannot find contact details. Grateful if anyone can help.

Thanks,
Roger
Roger

1971 Elan Sprint dhc
1966 S3 SE pre-airflow fhc
1966 S2 SE
HUL1K
New-tral
 
Posts: 3
Joined: 24 Jun 2021

PostPost by: promotor » Fri Jun 25, 2021 10:45 pm

HUL1K wrote:Thank you for replies and the Youtube suggestion (doh...why didn't I think of that?). Have posted a 20s video here:

https://youtu.be/zy77ZHHfEYQ

I have read good reports of Promotor on this forum but cannot find contact details. Grateful if anyone can help.

Thanks,
Roger


Hi Roger,

I think your first step is to remove the two output shafts and see how the bearings feel in isolation and also to have a look down the hole to see if anything looks untoward in the diff centre.
How long is it since the car was driven, even if just up and down the garage / drive?

Cheers.
Al
User avatar
promotor
Fourth Gear
Fourth Gear
 
Posts: 797
Joined: 16 Mar 2012

PostPost by: 2cams70 » Sat Jun 26, 2021 12:22 am

It sounds like it could be quite normal to me. This is just the noise from the planetary gears. They are spur gears and therefore noisy and when one side is not turning and the other is you’ll get a noise like that. I’d just leave it alone. You can only accurately assess the condition once you have the car on the road
1970 Ford Escort Twin Cam
1972 Ford Escort GT1600 Twin Cam
1980 Ford Escort 2.0 Ghia
Peugeot 505 GTI Wagons (5spdx1) (Autox1)
2022 Ford Fiesta ST.
2cams70
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 2164
Joined: 10 Jun 2015

PostPost by: Billmack » Sat Jun 26, 2021 8:55 pm

It's not too complicated. Have spmeone knock it apart and look it over. A new set of seals would never hurt
Billmack
Third Gear
Third Gear
 
Posts: 257
Joined: 30 Sep 2017

PostPost by: joe7 » Sat Jun 26, 2021 9:34 pm

Did you try turning it from the pinion side to see if it makes noises?
joe7
Second Gear
Second Gear
 
Posts: 165
Joined: 09 Oct 2013

PostPost by: HUL1K » Sun Jun 27, 2021 8:19 am

Thanks for the replies. Several ideas to pursue this week.

Amazing to be able to tap into a global network on such a niche topic.

Roger
Roger

1971 Elan Sprint dhc
1966 S3 SE pre-airflow fhc
1966 S2 SE
HUL1K
New-tral
 
Posts: 3
Joined: 24 Jun 2021

Total Online:

Users browsing this forum: No registered users and 19 guests