Speedo drive

PostPost by: William2 » Fri May 03, 2013 5:51 pm

I have a right angle speedo drive which is missing the protruding drive peg. Is it possible to repair this by trying to remove the peg shaft from an angle drive from another classic car drive and fitting it to the Lotus drive?
William2
Fourth Gear
Fourth Gear
 
Posts: 921
Joined: 20 Jan 2013

PostPost by: Orsom Weels » Fri May 03, 2013 10:20 pm

If you mean the square bit of speedo cable that goes into the gearbox speedo drive, you can get one here http://www.caterhamparts.co.uk/product. ... oduct=2443.
Regards,Tim
Orsom Weels
Third Gear
Third Gear
 
Posts: 409
Joined: 31 Oct 2011

PostPost by: vernon.taylor » Sat May 04, 2013 4:48 pm

Salut William

I also bought a twill from Caterham but buggered the speedo drive trying to get the mangled bit out - well, I think it's held in by a bit of plastic and that's what I destroyed, so if it's possible to get that too that would be the way to go.

Alternatively Sue Miller will sell you one on an exchange basis for cheaper than new.

@+

Vernon
User avatar
vernon.taylor
Fourth Gear
Fourth Gear
 
Posts: 683
Joined: 05 Nov 2010

PostPost by: William2 » Sun May 05, 2013 5:11 pm

Have taken your advice and ordered a quill from Caterham cars. Thanks for your help.
William2
Fourth Gear
Fourth Gear
 
Posts: 921
Joined: 20 Jan 2013

Total Online:

Users browsing this forum: No registered users and 44 guests