S1 Dash spacers?

[mgfollett]

Are there small wood spacers, maybe 1/2 inch thick that go behind dash between fiberglass? I have two that I think were behind dash but not sure where they go! (didn't note when pulled dash to restore)

Thanks, Mike

[Quart Meg Miles]

On the S2 they are behind the lower corners and self tapping screws pass through the dash and wood blocks before screwing into the fibreglass. I don't know where the inner end of the S1 dash attaches.

Actually the self tapping screws might be 4BA set screws as I seem to remember they used to come loose! Perhaps I should lock nut them.

[bitsobrits]

my S1 (with early half dash) had them at all the upper bolts holes. The lower two bolts near the shifter didn't have any.