Door seals

[diablo]

Where can I find the right door deals for my S4 FHC ? I mean the one which has a lip shape . I have bought seals from Sue Miller but they don't fit well , too thick ; too much pressure on the doors and difficulties to close them .I saw similar seals on other Lotus supplier website and i am afraid they will not suite . Last week end , on our mensual meeting in Le Touquet , I saw an Elan S3 DHC with lip shape door seals ; but the owner cannot help me , he bought his car like that .Any suggestion welcome
Cheers you all

[elanfan1]

Unfortunately no one makes the original style seal any longer. There may possibly be a few NOS old ones left out there but they?ll be hens teeth. I found a company that thought they might be able to remanufacture though there were problems in getting it spot on however they wanted a minimum order of 10,000 metres. That?s enough for around 1450 Elans - just totally uneconomic.

There has been plenty of threads on this subject and lots of different suggestions for alternatives.

[2tmike]

Have a look at :
https://www.woolies-trim.co.uk/category/37/side-seals
Part 265A
I've fitted these to my S4 DHC and thare's no problem with excessive pressure on he doors
Woolies will send you a sample to look at if you ask

[USA64]

You might try: https://www.macgregorukcarparts.com/

[69S4]

Have a look at :
https://www.woolies-trim.co.uk/category/37/side-seals
Part 265A
I've fitted these to my S4 DHC and thare's no problem with excessive pressure on he doors
Woolies will send you a sample to look at if you ask

I?ve been looking for door trim for my FHC for years without success. The trim I bought from Matty?s (I think) years ago is close but too thick round the hinge area so the door had to be slammed shut - not a good idea. To ease the pressure I cut a foot or so of it out. The door now shuts ok but with a section of trim missing. Woolies 265A looks like the right section but millimeters count with this stuff. At ?4.00 / metre though it?s worth a try.

[diablo]

Thank you for these infos ; I shall check these suppliers . One of my friend told me a friend of him who knews a friend who knews........Fitted seals from an old Fiat he owned ( I' ll try to have more infos about the modell of Fiat ) Who suited very well .

[richardcox_lotus]

I recall that they are the same section seals on Austin 1100 series cars.

However they are now even rarer than Elans......

[elanfan1]

I believe that?s correct Richard as you say not many left and doubt any of them would be long enough for a DHC.

[rcombs]

I think I am going to try one of the seals from Woolies (265A or 113). The bulb on the seal from MacGregor is too large for my car. My S3 came with a double lip seal, and I am sure it was too much seal for the doors.

Rick

[tdskip]

. I found a company that thought they might be able to remanufacture though there were problems in getting it spot on however they wanted a minimum order of 10,000 metres. That?s enough for around 1450 Elans ...

Oh come on now - think big!

[elanfan1]

Touch?!