Elan Bonnet Catch Plate

PostPost by: gearbox » Sun Aug 11, 2013 12:33 pm

Seems that I am missing the bonnet catch plates on my S4. These are the two small clips that go onto the hood itself that catches the latches. Part number 036B0033. Doesn't seem than anyone carries them so I am relegated to make them myself. I am told that all they are is a small U channel of sorts. Does anyone have a picture of one and perhaps give me the size? Thanks Allan
gearbox
Third Gear
Third Gear
 
Posts: 396
Joined: 12 Mar 2012

PostPost by: AlfaLofa » Sun Aug 11, 2013 12:50 pm

Allan,

If you are after a pair of catches as per the attached photo then I have 2 going begging.

I bought them by mistake a few years back :D

If you want them and can wait for them to arrive from this side of the pond you are most welcome.

No money required.
Attachments
BonnetCatch2.jpg and
Steve
'64 S1 Elan (Owned since '73)
'69 Alfa Romeo 1750 Spider Veloce (Owned since '77)
'70 Morris Minor 1000 (Owned since '85)
User avatar
AlfaLofa
Fourth Gear
Fourth Gear
 
Posts: 513
Joined: 19 Aug 2006

PostPost by: gearbox » Sun Aug 11, 2013 1:05 pm

Hi Steve;

Thank you for the generious offer, I will PM you directly. Thanks again Allan
gearbox
Third Gear
Third Gear
 
Posts: 396
Joined: 12 Mar 2012

Total Online:

Users browsing this forum: No registered users and 12 guests