Windscreens/windshields
5 posts
• Page 1 of 1
Post by: Mohe » Wed Aug 25, 2004 7:47 pm
Does any one know if the baby Elan windscreen/windshield changes over the series 1- 4 and from FHC to DHC.
I need one for my series 3 FHC and have the opportunity to buy a windscreen of uncertain age.
It would be good news if they are all the same.
Thank you in advance for your advice
Mohe (Leeds,UK)
I need one for my series 3 FHC and have the opportunity to buy a windscreen of uncertain age.
It would be good news if they are all the same.
Thank you in advance for your advice
Mohe (Leeds,UK)
- Mohe
- First Gear
- Posts: 26
- Joined: 14 Sep 2003
Post by: types26/36 » Wed Aug 25, 2004 8:41 pm
Mohe,
I'm sure that S1/2's are the same and S3/4's (fhc & dhc) are the same, so what I am saying is there is only two sizes, S1/2 & S3/4 there are ofcourse tinted and clear.
Rgds Brian
I'm sure that S1/2's are the same and S3/4's (fhc & dhc) are the same, so what I am saying is there is only two sizes, S1/2 & S3/4 there are ofcourse tinted and clear.
Rgds Brian
Brian
64 S2 Roadster
72 Sprint FHC
64 S2 Roadster
72 Sprint FHC
-
types26/36 - Coveted Fifth Gear
- Posts: 3407
- Joined: 11 Sep 2003
Post by: 1964 S1 » Thu Aug 26, 2004 1:27 am
Greetings, the S1 and S2's have "rounded" bottom corners at the rear. The S3 and S4's have sharper albeit obtuse bottom corners. There are "pointed" corner edges on the latter.
The two types are not interchangeable, if the one available to you has rounded bottom corners with no edge, it won't fit your car. You can see the difference by looking at the rubber seals in photographs in books. Good Luck, Eric
The two types are not interchangeable, if the one available to you has rounded bottom corners with no edge, it won't fit your car. You can see the difference by looking at the rubber seals in photographs in books. Good Luck, Eric
- 1964 S1
- Coveted Fifth Gear
- Posts: 1296
- Joined: 15 Sep 2003
Post by: twincamman » Thu Aug 26, 2004 4:16 pm
call jeff at JAE[ 1 805 967 5767 ] he supplied mine and :blink: knows about these things ed law
dont close your eyes --you will miss the crash
Editor: On June 12, 2020, Edward Law, AKA TwinCamMan, passed away; his obituary can be read at https://www.friscolanti.com/obituary/edward-law. He will be missed.
Editor: On June 12, 2020, Edward Law, AKA TwinCamMan, passed away; his obituary can be read at https://www.friscolanti.com/obituary/edward-law. He will be missed.
-
twincamman - Coveted Fifth Gear
- Posts: 2463
- Joined: 02 Oct 2003
Thank you all for your helpful advice
5 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 26 guests
Site map
SitemapIndex
RSS Feed