Mid 65 S2 interior door lever assembly

[h20hamelan]

Great day all

Looking for information on S2 interior door lever, and I suppose the exterior connection too.
Suspecting early S2 & S1 have the key in a different location. Also, I believe the interior lever is a bit different.

1, photos, links etc. I have the single upright lever (maybe this is where my confusion comes from-if there is another variety?) I require the right side.

2 is there an option to add the more available later S3-4 release and or is it worth it (maybe this is actually just a wanted ad or I should sell my left and change to 3-4?)

[h20hamelan]

Left side

As Miller and SJS don’t seem to list an option. TTR makes bodies and doors, what do people do?

[types26/36]

Dont know if these pics are use to you.

[h20hamelan]

Wow!
Yes please!
Looks correct.

Maybe a longer list, this was the first item for the hunt.
Suppose I will also be looking for exterior & interior handle (don’t particularly care about condition) also rod and hinge etc. There appear to be no mount on the body either. So…if available also please?

[h20hamelan]

Scan2024-02-01_172747.pdf

(478.81 KiB) Downloaded 111 times

supposing I have no clue what I am talking about

What is the correct lever, types26/36 pic shows what i have on the left, but the right/correct side.

can someone help narrow my search please.

Kind Regards

[h20hamelan]

to really confuse the situation, back to my first post in this thread

is there another option.

If I take a plug/mold of my S4 inner door skin, I presume I can use available parts. The S2 door lever, latch, and associated parts seem unobtainable/rare.
If I were to modify my S2 doors, what would the down side be, and benefits?

but maybe someone has a set for the right, and I am in absolutely no rush

[types26/36]

I think it highly unlikely that the S3 and S4 hardware could be adapted to suit s1/2 cars but then again they did put people on the moon...........

[types26/36]

[quote="h20hamelan"]Wow!
Yes please!
Looks [/quote
Sorry I may have mislead you, I was not saying the locks were available, I ment to say would these pictures be of use to you.
Sorry for any confusion.

[h20hamelan]

Wasn’t too confused
Yes, the pictures are perfect, the scan doesnt really show it very well.
My left side is against a wall, cant access it at all to polk about

[types26/36]

Quote "What is the correct lever, types26/36 pic shows what i have on the left, but the right/correct side."


Just to be clear, there are no links or rods on the S1/2 assemblies unlike the S3/4 (PITA system)
The opening buttons act directly on the catch mechanism.
The left and right are identical in operation so unsure why you think there is a difference apart from been handed.
They occasionally come up on ebay but often do not have the key/lock and are advertised as 26R type, this only means they were from the rear door from a BMC car.......can’t remember which one.....Morris Oxford or Austin I think. The front BMC ones have the key operated lock but are quite rare.

[h20hamelan]

more good information
thank you

[h20hamelan]

Maybe one will turn up at a jumble this spring.
I will post here if one is found.
Please share and do let me know if you see one.

Cheers

[Barney]

There are two types of internal handles.
The first as fitted to mine (S2 Feb '65) has a horizontal top.

The second has a stubbier, up-turned handle.

Sorry, I can't help with which style was first or when they changed.

[h20hamelan]

Thank You Barney

Though I cant really tell, do you figure yours looks like my Left in the 2nd post?

[Barney]

Thank You Barney

Though I cant really tell, do you figure yours looks like my Left in the 2nd post?

Yes, mine are like your photos in post #2.