Federal S4 Boot Hinge Brace
3 posts
• Page 1 of 1
I have 2 right angle tabs on the bottom of my Federal S4 DHC boot hinge brace. They appear to line up with the fuel tank straps. Do they hook under the straps or fit above the straps? Do I add a short piece of heater hose or foam over the tabs to soften the contact?
Dick
Dick
- 0005K
- Second Gear
- Posts: 81
- Joined: 27 Mar 2011
The fuel tank shouldn't have straps. There are simply three studs protruding from the bottom of the
tank through the body. Do the tabs line up with the hinge locations?
I just realized maybe you're referring to the extra tank that sits in the void between the strut
towers, that some cars received. If so, is that tank held in by straps? Can you provide a picture?
tank through the body. Do the tabs line up with the hinge locations?
I just realized maybe you're referring to the extra tank that sits in the void between the strut
towers, that some cars received. If so, is that tank held in by straps? Can you provide a picture?
Greg Z
45/0243K Sprint
45/7286 S3 SE DHC
45/0243K Sprint
45/7286 S3 SE DHC
-
gjz30075 - Coveted Fifth Gear
- Posts: 3022
- Joined: 12 Sep 2003
3 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 25 guests