S2 Vacuum Actuator
3 posts
• Page 1 of 1
Hi,
Does anyone know the full stroke length of the standard headlight vacuum actuator. I assume it’s the distance from the center place of the sphere, so half the diameter, maybe?
My diaphragms were completely gone as was a fair amount of each sphere so no way to get a good measurement.
Thank you,
Ian
Does anyone know the full stroke length of the standard headlight vacuum actuator. I assume it’s the distance from the center place of the sphere, so half the diameter, maybe?
My diaphragms were completely gone as was a fair amount of each sphere so no way to get a good measurement.
Thank you,
Ian
- Ianashdown
- Second Gear
- Posts: 200
- Joined: 14 Oct 2022
Hi Ian,
On the bench I measure total available stroke at 95mm, installed it's 70mm to fully raise/lower the headlamp pods. That's an S4 but no reason to think it would differ on your S2.
On the bench I measure total available stroke at 95mm, installed it's 70mm to fully raise/lower the headlamp pods. That's an S4 but no reason to think it would differ on your S2.
Roger
S4 DHC
S4 DHC
- oldelanman
- Coveted Fifth Gear
- Posts: 1926
- Joined: 02 Jan 2008
3 posts
• Page 1 of 1
Total Online:
Users browsing this forum: Spyder fan and 51 guests