Fitting Plus 2 roof rails

PostPost by: NYK » Mon Feb 24, 2020 10:31 am

I’m about to fit the roof rails to my recently repainted car, apart from a bit of sealant in the screw holes, should there be any sealant between the rails and the body?
NYK
Third Gear
Third Gear
 
Posts: 417
Joined: 27 Jul 2017

PostPost by: wotsisname » Mon Feb 24, 2020 3:55 pm

Just to clarify - these are the roof rail / gutters (not the headling rails). I don't believe you would put sealant under them (at least I didn't). I also put sealant in the screw holes (my headlining was out so was able to do it afterwards).
1968 Elan plus 2 - project
2007 Elise S2 [modified with a Hethel 70th sticker (yellow)]
2000 Elise S1 - Sold
wotsisname
Third Gear
Third Gear
 
Posts: 452
Joined: 24 Jun 2015

PostPost by: NYK » Mon Feb 24, 2020 4:00 pm

Yes, gutters. I assumed no sealant but thought I would check.
Thanks
NYK
Third Gear
Third Gear
 
Posts: 417
Joined: 27 Jul 2017

PostPost by: alan.barker » Tue Feb 25, 2020 1:01 pm

Just be sure correct dia pilot holes for the self tapping screws. Correct size Screwdriver and be very careful.
Alan
Alan.b Brittany 1972 elan sprint fhc Lagoon Blue 0460E
alan.barker
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 3757
Joined: 06 Dec 2008

PostPost by: NYK » Wed Feb 26, 2020 11:43 am

Good points, thanks
NYK
Third Gear
Third Gear
 
Posts: 417
Joined: 27 Jul 2017

Total Online:

Users browsing this forum: No registered users and 19 guests