Elan S/e Badge Position?
4 posts
• Page 1 of 1
OR... If someone could take a photo of the badge area with a tape measure/ruler in place. The pix must show the badge and the door opening or some other feature that shows the relationship of the badge to the body. Pix must be taken directly above the badge to eliminate as much distortion as possible (not at an angle).
That pix can be easily shared.
Then the photo can be printed to full scale, using the tape measure/ruler to verify proper scale and used as a template to place the badge in the correct position.
That pix can be easily shared.
Then the photo can be printed to full scale, using the tape measure/ruler to verify proper scale and used as a template to place the badge in the correct position.
**************
Life is more fun behind the wheel of a Lotus!
www.gglotus.org
www.gglotus.org/blog
Life is more fun behind the wheel of a Lotus!
www.gglotus.org
www.gglotus.org/blog
-
khamai - Second Gear
- Posts: 145
- Joined: 20 Oct 2003
4 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 61 guests