Worth ?

PostPost by: reb53 » Wed Sep 11, 2024 6:49 am

Not enough info here to form a good opinion but seems a little steep.
https://www.trademe.co.nz/a/motors/car- ... 4906186933

Ralph.

P.S. About 10,000 pounds.
reb53
Fourth Gear
Fourth Gear
 
Posts: 763
Joined: 09 Apr 2005

PostPost by: 512BB » Wed Sep 11, 2024 8:26 am

How is it a race engine if it has a standard crank? Seller states estimated power output of 130 bhp. You are not going to win many races with that sort of output. Way overpriced as you suggest Ralph, and you would be buying a pig in a poke for large $$$$$

Leslie
512BB
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1200
Joined: 24 Jan 2008

PostPost by: rgh0 » Wed Sep 11, 2024 8:39 am

Its a real messed up engine build specification and if its only 130hp out of 1640cc that reinforces it.

The cams dont match the crank rev capability, money was waisted on "steel rods" and many other issues will exist I suspect. Its probably worth about A$5000 assuming it has a usable head and block as most of the rest probably needs replacement to build a sensible road or race engine. The block may not even be usable as its bored to 85mm and most blocks have too thin walls at that bore.

cheers
Rohan
User avatar
rgh0
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 8413
Joined: 22 Sep 2003

PostPost by: elans3 » Sat Sep 14, 2024 3:59 pm

Sounds like a right "bitza".
Was probably in a Cortina or an Escort, seeing as the gearbox shown is a single-rail.
Current :- Elan S3 DHC SE S/S 1968,
1963 Alfa Giulia Ti Super Rep.
Previous :-
Elan S3 DHC SE SS 1968,
Elan S3 DHC S/E 1966
Elan S3 FHC Pre-Airflow 1966
elans3
Fourth Gear
Fourth Gear
 
Posts: 523
Joined: 12 Sep 2003

Total Online:

Users browsing this forum: No registered users and 6 guests