Vegher Built Twin Cam Engine for Sale
1 post
• Page 1 of 1
FOR SALE: Mark 2 6-bolt Twin Cam engine built by Dave Vegher. Streetable or trackable. . .complete and ready to install. . . $18,000
OR completely balanced, inspected, and reassembled MK2 (6-bolt) block assembly only. . .$8,000
OR complete late MK1 head assembly with Dave Bean super size valves, 0.47” cam lift cams, ported, polished, cc’d, valve clearances set. . . $8,000
Engine was recently removed from previously owned Jim Niff’s estate (1967 Lotus Elan RHD S3 FHC [#366818]).
Long in storage, the engine was totally disassembled, cleaned, and inspected for resale by Thompson, a respected Twin Cam and Lotus Elan specialist.
Found to be in excellent condition, the bottom end moving parts were balanced, seals and gaskets were replaced, new water pump kit installed. The double-webbed forged crankshaft was polished, looking brand new as were the other moving parts. Headwork unmistakably showing Vegher's mods.
Accessories include: High output oil pump $85, Recently serviced Weber twin cam carbs jetted specifically for the head $800, Custom tubular powder coated exhaust manifold $230, 2.5" OD straight through exhaust pipe with meg silencer $45, Newly resurfaced and balanced steel 6-bolt flywheel $125.
All items located in Southern CA/USA 91390 available at the source or limited delivery in this area. Shipping for major items by your arrangements and risk.
For particulars and photos contact Don Thompson: [email protected], or by phone: 661 480-8302
OR completely balanced, inspected, and reassembled MK2 (6-bolt) block assembly only. . .$8,000
OR complete late MK1 head assembly with Dave Bean super size valves, 0.47” cam lift cams, ported, polished, cc’d, valve clearances set. . . $8,000
Engine was recently removed from previously owned Jim Niff’s estate (1967 Lotus Elan RHD S3 FHC [#366818]).
Long in storage, the engine was totally disassembled, cleaned, and inspected for resale by Thompson, a respected Twin Cam and Lotus Elan specialist.
Found to be in excellent condition, the bottom end moving parts were balanced, seals and gaskets were replaced, new water pump kit installed. The double-webbed forged crankshaft was polished, looking brand new as were the other moving parts. Headwork unmistakably showing Vegher's mods.
Accessories include: High output oil pump $85, Recently serviced Weber twin cam carbs jetted specifically for the head $800, Custom tubular powder coated exhaust manifold $230, 2.5" OD straight through exhaust pipe with meg silencer $45, Newly resurfaced and balanced steel 6-bolt flywheel $125.
All items located in Southern CA/USA 91390 available at the source or limited delivery in this area. Shipping for major items by your arrangements and risk.
For particulars and photos contact Don Thompson: [email protected], or by phone: 661 480-8302
- dthompson002
- New-tral
- Posts: 11
- Joined: 10 Jul 2016
1 post
• Page 1 of 1
Total Online:
Users browsing this forum: 4545colin and 4 guests