Lotus elan parts for sale
8 posts
• Page 1 of 1
.JPG "IMG_6347 (1).JPG (1.26 MiB) Viewed 5199 times")
.JPG "IMG_6348 (1).JPG (1.33 MiB) Viewed 5199 times")
.JPG "IMG_6349 (1).JPG (1.49 MiB) Viewed 5199 times")
.JPG "IMG_6350 (1).JPG (1.6 MiB) Viewed 5199 times")
.JPG "IMG_6344 (1).JPG (1.1 MiB) Viewed 5199 times")
.JPG "IMG_6345 (2).JPG (1.77 MiB) Viewed 5199 times")
.JPG "IMG_6346 (1).JPG (1.49 MiB) Viewed 5199 times")
Post by: Elan45 » Tue Aug 22, 2023 6:16 pm
What are the con rods, length etc, condition. Why are there only 3? Who made them?
Diam of sway bars? tell me about flywheel/ clutch
Diam of sway bars? tell me about flywheel/ clutch
'67 Elan S3 SS DHC
'67 Elan FHC pre-airflow
'67 Elan S3 SE upgrade to 26R by Original owner
'58 Eleven S2 (ex-works)
'62 20/22 FJ (ex-Yamura)
'70 Elan +2S RHD
'61 20 FJ project
'76 Modus M1 F3
'67 Elan FHC pre-airflow
'67 Elan S3 SE upgrade to 26R by Original owner
'58 Eleven S2 (ex-works)
'62 20/22 FJ (ex-Yamura)
'70 Elan +2S RHD
'61 20 FJ project
'76 Modus M1 F3
- Elan45
- Coveted Fifth Gear
- Posts: 2518
- Joined: 23 Nov 2008
Post by: kiwi7r » Tue Aug 22, 2023 6:58 pm
Roll bars are 17.5mm and 16mm
Clutch and flywheel are used and where working ok when removed. We when to a 2 plate clutch system.
Rods are made by MAX peeding Rods (5 1/4) only 3 as the 4th decided to leave the block for some reason.
Clutch and flywheel are used and where working ok when removed. We when to a 2 plate clutch system.
Rods are made by MAX peeding Rods (5 1/4) only 3 as the 4th decided to leave the block for some reason.
- kiwi7r
- New-tral
- Posts: 2
- Joined: 21 Aug 2023
Post by: Elan45 » Tue Aug 22, 2023 8:04 pm
What are the brake adapters to fit? What hole spacing?
'67 Elan S3 SS DHC
'67 Elan FHC pre-airflow
'67 Elan S3 SE upgrade to 26R by Original owner
'58 Eleven S2 (ex-works)
'62 20/22 FJ (ex-Yamura)
'70 Elan +2S RHD
'61 20 FJ project
'76 Modus M1 F3
'67 Elan FHC pre-airflow
'67 Elan S3 SE upgrade to 26R by Original owner
'58 Eleven S2 (ex-works)
'62 20/22 FJ (ex-Yamura)
'70 Elan +2S RHD
'61 20 FJ project
'76 Modus M1 F3
- Elan45
- Coveted Fifth Gear
- Posts: 2518
- Joined: 23 Nov 2008
Post by: knockoffnut » Mon Nov 13, 2023 8:50 pm
I am interested too, as I have a new set of these rods on my shelf right now...
rgh0 wrote:I am interested in why one Maxspeeding rod decided it wanted to leave the block. What failed and in what circumstances ?
cheers
Rohan
1963 Unicorn
1964 S1
1965 S2
1967 S3 SE DHC
Frankentwincam 26R
Seven S2 A
Seven S2 F
1964 S1
1965 S2
1967 S3 SE DHC
Frankentwincam 26R
Seven S2 A
Seven S2 F
- knockoffnut
- Third Gear
- Posts: 227
- Joined: 02 Sep 2011
8 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 3 guests
Site map
SitemapIndex
RSS Feed