Elan parts (Greenbrae, California)
9 posts
• Page 1 of 1
Having owned various Elans since the early 1970's ((S1, S3, S3 coupe, 26R as well as a 26R rolling chassis) I have accumulated various bits. Now is the time to clean house. These are all located in the San Francisco North Bay Area. I can provide more detailed pics/info on anything here.
S3 tail light assembly, very good condition. SOLD
26R rear sway bar w/brackets, no links $250
26R (?) 13/16" front sway bar with brackets $150
S1/S2 roof bow, right and left side support pieces. Missing actual top SOLD
Rear differential assembly, 3.77 ratio $325
Set of bolt on steel wheel hubcaps, two perfect, one very nice and one badly scratched SOLD
Starter motor $25
Weber 40 DCOE, set of two. Need rebuilding SOLD
S2/S3(?) steering wheel, Colin Chapman autograph embossed on spoke, leather wrap. Leather wrap is worn, rest of wheel good. $300
Set of adaptor plates to replace rear rotoflex couplings with (unknown) joints. $25 or free with any other purchase !
All prices plus shipping, or I can arrange a meeting to pick up if you are local.
Ric
S3 tail light assembly, very good condition. SOLD
26R rear sway bar w/brackets, no links $250
26R (?) 13/16" front sway bar with brackets $150
S1/S2 roof bow, right and left side support pieces. Missing actual top SOLD
Rear differential assembly, 3.77 ratio $325
Set of bolt on steel wheel hubcaps, two perfect, one very nice and one badly scratched SOLD
Starter motor $25
Weber 40 DCOE, set of two. Need rebuilding SOLD
S2/S3(?) steering wheel, Colin Chapman autograph embossed on spoke, leather wrap. Leather wrap is worn, rest of wheel good. $300
Set of adaptor plates to replace rear rotoflex couplings with (unknown) joints. $25 or free with any other purchase !
All prices plus shipping, or I can arrange a meeting to pick up if you are local.
Ric
Last edited by ricster26 on Fri Nov 10, 2023 4:02 am, edited 4 times in total.
- ricster26
- New-tral
- Posts: 9
- Joined: 14 Aug 2023
Ceej wrote:I did so too, last week. No response.
I did not get a message from you regarding my Elan parts. I have gotten numerous messages about the parts from a number of different people, but nothing from "Ceej". Email me direct......
[email protected]" target="_blank or [email protected]" target="_blank
Ric Kellen
- ricster26
- New-tral
- Posts: 9
- Joined: 14 Aug 2023
JB
I pm'd you contact info but here it is again......two email addys to try.
[email protected]" target="_blank this is probably best.
[email protected]" target="_blank wifes, so I don't watch it as closely as I should.
I pm'd you contact info but here it is again......two email addys to try.
[email protected]" target="_blank this is probably best.
[email protected]" target="_blank wifes, so I don't watch it as closely as I should.
- ricster26
- New-tral
- Posts: 9
- Joined: 14 Aug 2023
ricster26 wrote:JB
I pm'd you contact info but here it is again......two email addys to try.
[email protected]" target="_blank" target="_blank" target="_blank this is probably best.
[email protected]" target="_blank" target="_blank" target="_blank wifes, so I don't watch it as closely as I should.
Hi Ric,
We’ve now connected through your email. I appreciate your help.
Jeff Brueckheimer (JB)
Regards,
JB
67 Airflow FHC
36/7398 RHD
Plymouth,MI
JB
67 Airflow FHC
36/7398 RHD
Plymouth,MI
-
jebracing - First Gear
- Posts: 22
- Joined: 18 Jul 2010
9 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 3 guests