SILL KICK/SCUFF PLATES

Post by: **theelanman** » Tue Mar 26, 2013 12:29 pm

further to a recent post I was asked if I could do these sill/kick plates...
so to that end Im just gauging if people want these before I get on with it...

Ive sketched up an idea.......

please feel free to add your sketch and dims and we can see which is do'able

chers
Gareth

Post by: **vernon.taylor** » Tue Mar 26, 2013 3:52 pm

Salut Gareth

Mark down one interested - possibly two.

I think a design with just one logo would look classier - I suppose it would have to be in the middle if the LH and RH are identical.

I imagine you measured up to protect the max possible area.

Would a cut-away item like the one I pictured make things more difficult/expensive?

Thanks for offering to do the donkey work.

@+

Vernon

Post by: **theelanman** » Tue Mar 26, 2013 5:50 pm

vernon
like this?

Post by: **Sea Ranch** » Wed Mar 27, 2013 6:05 am

Gareth, what material would you be making them out of?

Thanks,

Randy

Post by: **theelanman** » Wed Mar 27, 2013 7:45 am

Im planning on stainless steel grade 316

Post by: **vernon.taylor** » Wed Mar 27, 2013 7:46 am

Salut Gareth

theelanman wrote:vernon
like this?

Yeah, that's nice. Mark down interest in two pairs - if the price is right, of course.

Merci et @+

Vernon

Post by: **Stratosboy** » Wed Mar 27, 2013 8:28 am

I'd be interested in one pair, if the price is right?

Post by: **theelanman** » Wed Mar 27, 2013 10:54 am

looks like this

Post by: **andyhodg** » Wed Mar 27, 2013 1:10 pm

Hi, Subject to a good price I would be interested in a pair.

Good thinking

Andy

Post by: **theelanman** » Wed Mar 27, 2013 2:07 pm

the list....(so far...)

1. vernon
2. vernon
3. stratosboy
4. andyhodg

Post by: **tcsoar** » Thu Mar 28, 2013 8:44 am

Hi Gareth,

I would be intrested in a pair, one thing that has been going through my mind was how they would be fixed.

Chris,

Post by: **theelanman** » Thu Mar 28, 2013 8:50 am

tcsoar wrote:Hi Gareth,

I would be intrested in a pair, one thing that has been going through my mind was how they would be fixed.

Chris,

I was thinking a foam sticky tape sort of thing......

Post by: **markcs** » Thu Mar 28, 2013 2:56 pm

Gareth,

I would take a pair as well.

Mark

Post by: **vernon.taylor** » Thu Mar 28, 2013 8:42 pm

Salut Gareth

Do you think you could enquire about getting the +2 nose/moustache trim made up while you're at it?

EDIT: and rear dust shields!

Merci

Vernon

Post by: **theelanman** » Tue Apr 02, 2013 11:44 am

ok price in.....

?40 per pair......(ie ?20 per kick plate)

thoughts?????

these are lazer etched (with no infill) grade 316 stainless steel
I think the lack of infill is more subtle and less 'in yer face'

thoughts?????

SILL KICK/SCUFF PLATES

Total Online:

Recent Forum Topics

Support LotusElan.net!

Recent Wiki Articles