Huco Fuel Pump

[Donels]

I’m fitting a Huco 133010 fuel pump and inertia switch. Does anyone know the current draw for this pump for fuses etc and what’s the view on using a solenoid or not?

Dave

[nmauduit]

FWIW I've installed a similar setup on my car (different pump brand, placed at the tank) directly through the inertia switch... so far, so good.

I was trying to verify the current draw of this specific pump model (apparently Hüco has been purchased by Hitachi) and found 75W / 5Amp both for the 133000 version, and for your version 133010.